Put wireless communication right where you need it! Position the compact and durable Q Series 2-way radio callbox virtually anywhere to maximize manpower efficiency, improve safety and service response times. Deploys easily - no wires, no trenching, no construction required. Can be used stand-alone using alkaline batteries or can be powered using external AC adapter.
 
The Q Series callbox provides crisp, clear, long range voice communication and allows staff and visitors to communicate with your analog radio-equipped personnel from points near and far, be it the plant floor, a maintenance garage, the gated entrance, a delivery dock or the 9th Tee. Accomplish more with your 2-way radio system!

FEATURES

• Wireless, 2-Way, Push-To-Talk, Narrowband Analog Technology
• No trenching or construction costs to install
• Available in VHF MURS License-Free frequency band, and license-required VHF 150-165MHz and UHF, 450-470MHz frequency band
• Business band frequencies, long range performance - up to1 mile* *line-of-sight.
• Works with any VHF or UHF analog business band 2-way radio
• Durable, gasket-sealed, high-impact molded, polycarbonate enclosure
• Tamper and Vandal-Resistant, Internal Antenna, Long-Life, Machined Aluminum PTT Button
• Battery* Powered For Stand-Alone Operation or External Power for Always-On Operation. *For optimal performance in battery only applications, Auto Turn-Off should be enabled.
• Adjustable Volume, High-Audio Output, Provides Easy To Hear Audio In High Noise Areas
• User Adjustable field-programmable settings.
• PC programmable
• Built-in relay control (Series 7 model only) allows long-range, remote control of gates or doors or use with optional flashing strobe light.
• Standard Flange Mount Hole Pattern Easy Installation. Optional Mounting Brackets Available
• Available In Different Enclosure Colors:  High-Viz Green and Black
• Call Ritron regarding custom colors for volume applications
• Designed and Made in the USA

Specifications

RF Channels:1 Channel Analog(12.5KHz)
Signaling: CTCSS & DCS Encode/Decode, DTMF Encode/Decode, SelCal Encode/Decode, 2-Tone Decode Only
Dimensions:  7” H x 5” W x 3” D
Weight: 2.75 lbs
Enclosure Material: Gasket Sealed, High-Impact Polycarbonate
Colors: Black or High-Viz Green
Environmental: Splash resistant, shock and vibration per Ritron test
Operating Temperature: -20°C to +55°C (-4°F to 131°F) Battery rating. At 0°C the capacity is < 50% rated) Talk range will decrease at low temperatures when operating on alkaline batteries.
Programming: Field programming capability of limited parameters. Full programming capability using internal USB Connector used for full PC Programming.
Built-in Remote Control Relay(7 Series): Can be used to remotely control gates, doors or strobe light. (7 Series) Relay switch is controlled when callbox receives the pre-programmed selective signaling command code.

• SPDT, 3A, 125VAC/30VDC – Normally Open or Normally Closed (NO Default). Modes of Operation: Momentary or Toggle, On/Off.
• Aux Sensor Monitoring Input : Optional sensors used to detect motion, gate movement, vandal/tamper or vehicle presence can be connected to the callbox using the sensor input.
• Sensor input responds to an Open or Closed switch. Callbox will send either an alarm tone or a recordable voice message when optional switch/sensor detects a change.
• Can also be programmed to automatically turn callbox ON and transmits recordable voice message or alarm tone to radios monitoring callbox activity.

Adjustable Speaker Volume: Adjustable 20% to 100%
Automatic Turn-Off Feature: Conserves batteries. Selectable turn-off times will automatically turn callbox off after a set period of inactivity on the radio channel. Auto Turn-OFF feature must be enabled when using battery only power.
Listen-In Feature: Callbox can be selectively paged to allow remote monitoring of audio in the vicinity of the callbox.
Busy Channel TX Inhibit: Prevents Callbox from transmitting if someone else is using the radio channel.
Recordable Voice Messages: Greeting Message/Send Call Alert Message/Sensor ON/Sensor OFF/ Low Battery Message/Send Power Fail Message/Auto “Re-Send” - Selectable 0-5 times.
Battery Life: 3 D-Cell Alkaline Batteries: Number of Transmissions: Approximately 6,000 based on a duty cycle of: 3 Seconds Receive, 3 Seconds Transmit, 10 Seconds Standby