The AWR-RP9000 Repeater extends radio coverage for greater range of portable two-way radios and other devices using radio frequencies. Perfect to use in senior living communities, retail stores, distribution centers, schools and other “hard to cover” areas. The compact design and metal housing makes this repeater easy to install and to maintain.
AWR-RP9000 Repeater Includes:
- AWR-RP9000 Repeater
- Power Supply Cable (221287)
Features
- 450 MHz to 470 MHz Frequency Range
- Built-in Six Cavity Band Reject Duplexer
- Single tone/code operation
- 2 Watt Transmitter Output
- 39 CTCSS Tones Available
- 83 DCS Codes Available
- 83 IDCS Codes Available
- Companding – On/Off
- Hang Time – 0 to 5 seconds
- Hang Time w or w/o tone/code checkbox
Specifications
- Silver Housing
- 11.8125” 7” x 2.75”; 5 lbs (without antenna)
- Detachable Antenna
- Audio Accessory Jack: DB15HD
- Power Requirement: 12V, 2 amp
- Power Input: 12V DC Power Input
- Transmitter Power: .5/2 Watts
- 1 Channel
- FCC ID: Q9SAWRERM100
- IC: 4651A-ERM100
- Operating Frequency Range: 450 – 470 MHz
- Frequency Separation: 12.5 KHz / 5 MHz
- Tone / Code Signaling: CTCSS / DCS
- Hang-Time Timer: 0 – 5 seconds
- Time-out Timer: 30 to 300 seconds or Off
- RF Connector: Type N FM
- DC Power Connector: 2.1 mm
- Antenna Impedance: 50 Ohm
TRANSMITTER
- RF Output @Antenna Port: .5/2 Watts
- Frequency Stability: 2.5 ppm
- Modulation: 11K0F3E
- Deviation: +/- 2.5K
- Spurious & Harmonics: ≤-36 dBm
- Audio Response: 300 – 3000 Hz
- FM Hum & Noise: ≥45 dB
- Duty Cycle: 50 / 50
RECEIVER
- Rated Audio Power Output: 500 mW
- Sensitivity: (12 dB SINAD) .3 μV
- Selectivity: (EIA) 60 dB
- Image Rejection: (EIA) 80
- Intermodulation Rejection: (EIA) 65 dB
- Frequency Stability: +/- 2.5 ppm
- Noise Squelch Sensitivity: .25 μV
- Audio Frequency: 300 -3000 Hz
Authorized Dealer
Price Match Guarantee
