The AWR-ERM100 is an embedded radio module, which is a small electronic device used to wirelessly transmit and/or receive radio signals from a PC or an embedded wireless device.
Common Uses:
- Call Box Application
- Nurse Call Radio
- Alarm System Radio
- Public Address Interface
Features
- RF power output .5 / 2 Watts
- RF Channels: 16 Independent TX/RX frequencies
- Frequency: 450-470 MHz (UHF Band)
- Frequency Stability: +/- 2.5 ppm
- Tone/Code Signaling: CTCSS & DCS
- Audio Companding Tx & Rx: Software configurable per channel
- Remote channel steering
- Input for POCSAG paging
Specifications
- Black Housing
- 1.25” x 3.13” x 5.7”; 7.43 oz
- Detachable Antenna
- Audio Accessory Jack: 20 Pin Rectangular
- Power Requirement: 12V, 2 amp
- Power Input: 12V DC
- Transmitter Power: 2 Watts
- 16 Channels
- FCC ID: Q9SAWRERM100
- IC: 4651A-ERM100
- Operating Frequency Range: 450 – 470 MHz
- Frequency Separation: 12.5 KHz
- Tone / Code Signaling: CTCSS / DCS
- Transmit Time-out Timer: 30 to 300 seconds or Off
- RF Connector: BNC FM
- DC Power Connector: 2.1 mm
- Antenna Impedance: 50 Ohm
TRANSMITTER
- RF Output @ Antenna Port: 2 Watts
- Frequency Stability: 2.5 ppm
- Modulation: 11K0F3E
- Deviation: +/- 2.5K
- Spurious & Harmonics: ≤-36 dBm
- Audio Response: 300 – 3000 Hz
- FM Noise: ≥45 dB
- Duty Cycle: 50 / 50
RECEIVER
- Audio Power Output: 500 mW
- Sensitivity: (12 dB SINAD) .3 μV
- Selectivity: (EIA) 60 dB
- Image Rejection: (EIA) 80
- Intermodulation Rejection (EIA): 65 db
- Frequency Stability: +/- 2.5ppm
- Noise Squelch Sensitivity: .25 μV
- Audio Frequency: 300-3000 Hz
Authorized Dealer
Price Match Guarantee
